Atlantic Ultraviolet Nutripure 2B-SC Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Atlantic Ultraviolet Nutripure 2B-SC. Atlantic Ultraviolet Nutripure 2B-SC 16 pagina's. Sanitary conditioners
Pagina afdrukken
PRODUCT APPLICATION
C
onstruCtion
The Nutripure
®
Sanitary Conditioner consists of:
Genuine STER-L-RAY
•
wavelength of 254 nanometers (nm), which is highly effective against airborne microbes including: virus, bacteria, and mold
spores.
•
ArmorLite™ Safety Shield: Protective coating applied to STER-L-RAY
dangers associated with fragments of broken quartz and mercury contamination.
•
Surelite
120 volt or 230 volt 50/60 Hz electronic ballasts.
TM
•
Promate
permanent, washable, electrostatic intake filter(s), capable of removing small airborne particles.
TM
•
Promate
Sight glass assemblies, which provide visual indication of STER-L-RAY
TM
operation without the risk of ultraviolet exposure.
•
An enclosure and access cover constructed of stainless steel, type 304. Stainless steel construction provides strength,
durability and lasting value.
•
Specular Polished Exposure Chamber increases efficiency by reflecting UV rays and limiting UV absorption
•
Aluminum collar which mates to 3" (Models 2B, 3B, 4B and 5B) or 4" (Model 6B) NPS tank inlet.
Adjustable pedestal legs, used to level the Nutripure
•
•
A .3-micron, 99.97% minimum efficiency, HEPA Absolute Filter (Models 4B-ASC, 5B-ASC and 6B-ASC only).
P
o
rinCiPle of
Peration
The Nutripure
®
Sanitary Conditioner design has been carefully conceived to provide germicidal ultraviolet exposure for air
disinfection. The treated air is used in the headspace of liquid storage tanks helping to prevent condensation. The dosage, as it
applies to ultraviolet disinfection, is a function of time, and the intensity, of ultraviolet radiation, to which the air is exposed. The
exposure time, in seconds, is the total time it takes the air to move through the ultraviolet field, produced by the germicidal lamp(s).
Exposure time is related to the airflow rate; the higher the airflow, the lower the exposure time or the lower the airflow, the higher
the exposure time.
The operation of the Nutripure
1. Air is drawn into the sanitary conditioner through the electrostatic filter or pre-filter.
2. Air is forced into the exposure chamber, where it is irradiated by the germicidal ultraviolet lamp(s).
3. Sight glass provides positive indication of germicidal lamp(s) operation
4. On models with a HEPA Absolute Filter, the irradiated air is then forced through the filter which removes more than 99.97%
of particles as small as 0.3 microns.
5. The purified air is circulated through the head space of the tank, keeping the air temperature inside the tank consistent with
the air temperature outside the tank, helping to reduce condensation.
6. Air is exhausted out of tank through a filtered tank vent.
®
Germicidal Ultraviolet Lamp(s), which deliver germicidal ultraviolet energy in the specific
Figure 1 – Installation of Pipe Collar and Pedestal Legs
®
Sanitary Conditioner is as follows:
®
Lamps, ensures protection by eliminating the
®
once installed on the tank inlet. (Not applicable for Model 6B-ASC)
®
Germicidal Ultraviolet Lamp(s)
5