Electrolux RH30WC55GS Installatie-, gebruiks- en onderhoudshandleiding - Pagina 16

Blader online of download pdf Installatie-, gebruiks- en onderhoudshandleiding voor {categorie_naam} Electrolux RH30WC55GS. Electrolux RH30WC55GS 21 pagina's. 30” et 36” hotte aspirante
Ook voor Electrolux RH30WC55GS: Fabriekscatalogus onderdelen (4 pagina's), Brochure & specificaties (2 pagina's), Installatie-, gebruiks- en onderhoudshandleiding (20 pagina's), Installatie-, gebruiks- en onderhoudshandleiding (20 pagina's), Installatie-, gebruiks- en onderhoudshandleiding (20 pagina's), (Engels) Installatie-, gebruiks- en onderhoudshandleiding (25 pagina's), (Frans) Handboek voor installatie, gebruik en onderhoud (21 pagina's)

Pagina afdrukken

Electrolux RH30WC55GS Installatie-, gebruiks- en onderhoudshandleiding

16 16

Special functions

Clock programming

Clock pr

ogramming

Clock pr

ogramming

The clock can be reprogrammed at any time except during an active timed function.

The clock can be displayed in a twelve hour format and valid clock times are from 1:00 to 12:59.

The clock can be reprogrammed pressing the " T T T T T imer

adjusted with the "

The user can have minute increments / decrements of 1 minute, but if the user keep pressing the "

" buttons for more than 1 second, the increments / decrements will be of 5 minutes.

During this option the control will round to the nearest 5 minutes.

The user can nish on reprogramming the clock pressing the " T T T T T imer

After 1 minute of no button pressed the control will accept the programmed clock time and will add one

minute to the set clock.

Gr Gr Gr Gr Grease lter saturation alarm

ease lter saturation alarm

After thirty fan functional hours, the display will show "Gr Gr Gr Gr Grease Filter

When this icon is shown in the display, the grease lters installed are required to be washed.

To reset the grease lter saturation alarm the user must press the "

action the icon " Gr Gr Gr Gr Grease lter

Char

coal lter saturation alarm (Recir

Charcoal lter saturation alarm (Recir

Char

coal lter saturation alarm (Recirculating accessories)

coal lter saturation alarm (Recir

After one hundred and twenty functional hours of the fan, the display will show " Char

is active. When this icon ashes on display, the charcoal lters installed are required to be replaced or

reactivated.

To reset the charcoal lter saturation indication the user must press the "

this time the icon " Char

Audible signal activation and deactivation

The audible signals can be activated or deactivated pressing the "Light

If the audible signal is activated, a tone must sound and the "Snd

2 seconds.

If the audible signal is deactivated, the " Snd

tone must sound.

Char

Charcoal lter inclusion and exclusion (Recir

Char

coal lter inclusion and exclusion (Recir

coal lter inclusion and exclusion (Recir culating accessories)

coal lter inclusion and exclusion (Recir

Char

coal lter inclusion and exclusion (Recir

The charcoal lter inclusion or exclusion can be set by pressing the "

time for 5 seconds.

The Inclusion or exclusion of charcoal lter must be selected while the lamps and the motor are OFF.

When the charcoal lter has been excluded, the charcoal lter alarm is disabled.

Heat sensor

The control is equipped with a heat sensor that will turn on the blower at second speed if excessive heat

occurs (over 158° F

If the blower is OFF or if it is operating at rst speed, the blower will be set automatically to second speed,

the display shows the word " CArE

During this state, the user may raise the blower speed to third speed but can not decrease the speed.

When the temperature level on the hood drops to normal, the blower will operate in the setting de ned by

the user before the alarm occured.

" and "

" buttons. Colon ":" will ash indicating clock programming mode.

ease lter

ease lter" is not displayed, and the hood has the normal display operation.

ease lter

Char

coal lter

Char

Char coal lter

coal lter" is not displayed and the hood has the normal display operation.

coal lter

Snd" symbol must appear on the display for 2 seconds and no

Snd

158° F

70°C

158° F

158° F or 70°C

70°C

70°C) surrounding the control area.

CArE" to indicate that heat sensor has detected an excessive heat.

CArE

Control buttons - Special functions

imer" button for 5 seconds, and after, the clock can be

imer

imer" button.

ease Filter

ease Filter" if the fan is active.

ease Filter

culating accessories)

Light

Light" button for 5 seconds.

Light

Snd" symbol must appear on the display for

Snd

culating accessories)

" button for 5 seconds, after this

Char coal Filter

Char

coal Filter" if the fan

coal Filter

Char

coal Filter

" button for 5 seconds, after

" and "

" buttons at the same