Electrolux RH30WC55GSB Installatie-, gebruiks- en onderhoudshandleiding - Pagina 18

Blader online of download pdf Installatie-, gebruiks- en onderhoudshandleiding voor {categorie_naam} Electrolux RH30WC55GSB. Electrolux RH30WC55GSB 21 pagina's. 30" and 36" free-standing range hood

Pagina afdrukken

18 18 18 18

Care and cleaning

The frequency of cleaning depends on the amount

and type of cooking.

Do not use the ventilating system without the

surfaces.

Always unplug or disconnect the appliance from the

power supply before servicing.

attempting to clean any part of the appliance.

Filters

anodized aluminum and are long lasting.

T T T o Remove The Metal Gr

o Remove The Metal Gr

o Remove The Metal Grease Filters

o Remove The Metal Gr

Pull the spring release handle.

T T T o Replace The Metal Gr

o Replace The Metal Gr

o Replace The Metal Grease Filters

o Replace The Metal Gr

Reverse procedure.

T T T o Clean Filters

o Clean Filters

least once a month; they can be washed by hand

or in the dishwasher.

dry thoroughly before replacing it.

ease Filters

Care and cleaning

Lights

Before replacing the lamps, switch power off at

service panel and lock service panel disconnecting

means to prevent power from being switched on

accidentally.

NOTE: Turn off the lights and fan. Allow the

lights to cool before handling. Replace lights

per instructions. If new lights do not operate,

be sure lights are inserted correctly before

calling service.

Replace Lights

•

Remove the inner lamp lens cover by inserting a

slots and gently prying it free.

NOTE: Do not remove the outer trim ring (lamp

assembly).

Inner

ring

The glass lens and inner trim ring are 2 pieces

loose tting. Be careful when removing the trim

ring that the glass lens does not fall out.

•

Grasp the bulb and pull it straight out from the

lamp socket.

•

Replace with 120 volt, 40 watt halogen bulbs with

a G9 base SUITABLE FOR USE IN OPEN

LUMINAIRES.

Follow package directions, wear gloves, do not

touch bulb with your bare ngers.

Bulb

NOTE: Once you have replaced the light bulb,

make sure to put back the glass in its place.

Outer

ring

•

Replace inner cover by

inserting the three

retaining tabs into the

three slots and pressing

them rmly in place.