Electrolux # Gebruikershandleiding - Pagina 5

Pagina afdrukken

Cycle Selection

Turn cycle selector clockwise to desired cycle and setting.

For best results

Follow the fabric care label

instructions on items to be

dried.

Each cycle ends with a cool down period. The heat

automatically turns off and the load continues to tumble

during the cool down period. This reduces wrinkling and

makes items easier to handle during unloading.

Drying time varies depending on size and dampness of load

and fabric type. Room temperature and humidity, type of

installation and electrical voltage or gas pressure can also

affect drying time.

AUTO FABRIC / AUTO SYNTHETICS / AUTO WHITES

Drying time is determined automatically at the temperature

selection of your choice.

•

Medium heat

is suggested for permanent press items.

•

Initially set cycle selector on

•

For items requiring more drying time, set cycle selector

on more dry.

•

For items requiring less drying time, set cycle selector on

less dry.

•

A signal will sound toward the end of the cool down

period when the end of cycle chime is turned on.

OPERATING INSTRUCTIONS

PUSH TO START

normal dry (on select models).

Auto Fabric Care

AUTO COTTON / AUTO COLORS (on select models)

This cycle is best for cotton items. Drying time is determined

automatically at the temperature selection of your choice.

•

High heat

is suggested for cotton items.

•

Medium heat

is suggested for permanent press items.

•

Low heat

is suggested for knit and delicate items.

If the dried load cannot be removed promptly, the cycle

selector will advance to the Wrinkle Free/Press Saver (on

select models) setting where unheated tumbling continues

for approximately 30 minutes to help reduce wrinkling.

Unless the Cycle Signal has been turned off, it will sound

brieﬂ y every 5 minutes as a reminder to remove the load.

TIMED DRY

This cycle provides up to 70 minutes (or up to 100, on

select models) of drying time at the temperature selection

of your choice.

When drying permanent press items, turn the cycle selector

to the Perm Press (on select models) setting (30 - 40

minutes). This is the average time needed to dry most loads

of permanent press items.

Temperature Selection

Always follow directions on fabric care labels.

- FIRE HAZARD - To avoid ﬁ re hazard, do not

use heat to dry items containing feathers or down, foam rub-

ber, plastics, or similarly textured, rubber-like materials. Use

the Timed Dry cycle and the Air Fluff/No Heat setting.

The high heat, medium heat, and low heat temperature

settings may be used with any cycle setting. The air ﬂ uff-no

heat setting can be used only in the Timed Dry cycle. Air ﬂ uff-

no heat setting tumbles the load without heat. Use air ﬂ uff to

freshen clothing, pillows or blankets, or to dust draperies.

Perm Press