OBJ_BUCH-134-007.book Page 17 Tuesday, December 16, 2008 9:07 AM
Technical Data
Cordless angle drill/driver
Article number
Rated voltage
No-load speed
Max. torque for
hard/soft screwdriving
application according
to ISO 5393
Torque adjustment
range
Max. screw dia.
Max. drilling dia.
– Steel
– Wood
Weight according to
EPTA-Procedure
01/2003
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is less than 70 dB(A). Uncertainty
K =3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
2
a
=2.5 m/s
, Uncertainty K =1.5 m/s
h
Screwdriving: Vibration emission value
2
a
=2.5 m/s
, Uncertainty K =1.5 m/s
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
Bosch Power Tools
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
GWI 10,8 V-LI
different accessories or poorly maintained, the
Professional
vibration emission may differ. This may signifi-
3 601 C60 9..
cantly increase the exposure level over the total
working period.
V=
10.8
An estimation of the level of exposure to vibra-
-1
min
0 – 585
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
Nm
13/5
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
Nm
2.6 – 5.2
as: maintain the tool and the accessories, keep
mm
5
the hands warm, organisation of work patterns.
mm
8
Declaration of Conformity
mm
10
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
kg
1.1
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
21.11.2008
2
,
Assembly
2
.
Battery Charging (see figure A)
Dr. Eckerhard Strötgen
Head of Product
Certification
Use only the battery chargers listed on the
accessories page. Only these battery charg-
ers are matched to the lithium ion battery of
your power tool.
1 609 929 R74 | (16.12.08)
English | 17
Pagina afdrukken