Drill Master 40070 Gebruikershandleiding en veiligheidsinstructies - Pagina 8
Blader online of download pdf Gebruikershandleiding en veiligheidsinstructies voor {categorie_naam} Drill Master 40070. Drill Master 40070 12 pagina's. Orbital hand sander
Ook voor Drill Master 40070: Montage- en bedieningshandleiding (13 pagina's)
Pagina afdrukken
Specifications
Electrical Rating
Speed
Dust Chute
Sandpaper Pad
Setup - Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURy
REVENT SERIOUS INJUR FROM A
REVENT SERIOUS INJURy
Make sure that the Switch is in the off-position and unplug the tool from its
electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following
pages, refer to Parts List and Diagram on page 11.
Assembly
Dust collection Setup
1. Turn the Chute (0) so that the tab on
top of the rectangular end faces up.
Snap it in place into the rectangular
shaft at the back of the Sander.
2. Connect a 1-1/4" dust collection hose
from the Chute to your dust collection
system (hose and system not included).
3. The Dust Collection Chute (0) will only
work if the sandpaper has holes that line
up with the 6 dust collection holes in the
Backing Pad (28). (There are 4 other holes
in the Backing Pad for the Screws (29).)
Page 8
120V~ / 60Hz / 1A
12,000 OPM
1
1
/
" OD
4
1
4" W x 4
/
" L
2
y
y FROM A
ccIDENTAL OpERATION:
For technical questions, please call 1-800-444-3353.
y
y INFORMATION
section
Functions
Switch
Backing
Backing
pad
4005695
power cord
chute
clamp
Item 40070
Dust