Atlas AA50PHD Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Atlas AA50PHD. Atlas AA50PHD 20 pagina's. 50w mixer amplifier
Ook voor Atlas AA50PHD: Gebruikershandleiding (20 pagina's)

Pagina afdrukken

Owner's Manual

How To Trouble Shoot Your Speaker System If The Limit LED Is Illuminating

C. If the first two check points are OK, there is probably a short in the wiring of the speaker system. Common causes include

staples through the wire and the wire cut by metal conduit causing a short to ground.

D. Excessive Current Draw - The Limit LED will illuminate Yellow when the amplifier is consuming excessive current. The most

likely cause for the fault is an incorrect load impedance connected to the amplifier. The LED should not steadily illuminate if a

proper load is applied. Note: An occasional LED flash is okay during standard operation. When LED is ON audible distortion

may be heard at the speakers.

E. After finding and correcting the issue, perform the PHD test until the Limit indicator is no longer illuminating.

50W Mixer Amplifier

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

– 13 –

Specifications are subject to change without notice.

AA50PHD

AtlasSound.com