Atlas MVXA Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Atlas MVXA. Atlas MVXA 8 pagina's. Multi-channel amplified monitor panel

Pagina afdrukken

MVXA SERIES

MULTI-AMPLIFIED MONITOR PANEL

MVXA Series Front Panel View

1. Power Indicator

The distinctive Blue Power™ LED indicates when the

MVXA Series monitor is on.

2. Rack Mount Brackets

Install flush to front of unit for use in a standard 19"

EIA rack or cabinet

3. Output Amplifier

The MVXA Series uses a 3 Watt amplifier to drive the

internal speaker, headphone jack, and/or an external

speaker

4. Internal Speaker

The internal speaker provides built-in audio

monitoring capability. It must be used in conjunction

with other monitoring methods or bypassed (see

examples).

Examples:

a) Headphones may be used to monitor the audio

signal. When headphones are connected to the

mini headphone jack; the internal speaker is

bypassed.

b) An external speaker may be connected to the

speaker out terminals for local or remote

monitoring. When an external speaker is

connected, both internal and external speakers

will be active. To bypass the internal speaker,

the speaker/headphone disconnect jumper

must be moved to the "off" position. Note: This

also bypasses the headphone jack.

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •

Specifications are subject to change without notice

AtlasSound.com

Printed in China

OWNER'S MANUAL

c) An external line level device may be connected

to the line out terminals. When connected, both the

internal speaker and the line level device will be

active. To bypass the internal speaker, the speaker

headphone disconnect jumper must be moved to the

"off" position. Note: This will also bypass the

headphone jack. (The line level device is not affected

by the unit's volume control).

5. Headphone Monitoring

When the mini headphone jack is utilized, the internal

speaker is automatically bypassed.

Caution: Turn volume level completely down before

plugging in headphones. High sound pressure levels

are possible

6. Visual Monitoring LEDs

Monitor panels have eight (MVXS-2008) or sixteen

(MVXA-2016) bargraph displays; one for each

channel. Each display uses twelve, high-quality and

oversized LEDs to provide clear identification and

easy readability from a distance. The meter's

dynamic range is from -30dB to +3dB.

The bottom ten LEDs are green and have VU

ballistics similar to a typical analog meter. These

monitor the range from -30dB to -2dB.

The top two LEDs are red to indicate peak response.

They correspond to 0dB and +3dB to indicate short

input levels that are above the specified reference

level. This provides immediate visual warning if signal

peaks are above the reference level.

TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

00606

AT000384 RevB 06/06

PN 484004