Bosch VAC120 Gebruiksaanwijzing/veiligheidsinstructies - Pagina 10

Blader online of download pdf Gebruiksaanwijzing/veiligheidsinstructies voor {categorie_naam} Bosch VAC120. Bosch VAC120 33 pagina's.

BM 2610035086 05-14_VAC120 5/14/14 8:50 AM Page 10

CLEANING THE FILTER ASSEMBLY

(see figure 7)

The filter unit must not be wet cleaned.

1. Hold the vacuum cleaner down slightly so

that dust cannot fall out of the dust

canister when the vacuum cleaner is

opened.

2. Press dust canister release button and

remove the dust canister from the motor

housing.

3. Reach into the recess on the motor

housing and pull the filter unit off the motor

housing by the filter seal.

4. Brush down the flaps of the pleated filter

with a soft broom.

5. Assembly is carried out in reverse order.

MALFUNCTIONS

In the case of insufficient vacuuming

performance, check the following:

– Is the dust canister full?

See "Cleaning the Dust Canister",

page 9.

– Is the folded filter clogged with dust?

See "Cleaning the Filter Assembly",

page 10.

– Is the capacity of the battery pack too low?

See battery/charger manual (included

with tool).

Regular emptying of the dust canister and

cleaning of the filter assembly ensures

optimal vacuum capacity.

If the vacuuming performance is not

achieved thereafter, take the vacuum cleaner

to a Bosch authorized service center.

-10-

FILTER

FIG. 7