AirTechnic ENERGY BOX - TO 350 Montage- en onderhoudshandleiding - Pagina 10
Blader online of download pdf Montage- en onderhoudshandleiding voor {categorie_naam} AirTechnic ENERGY BOX - TO 350. AirTechnic ENERGY BOX - TO 350 20 pagina's. Ceiling type heat recovery unit (aluminium plate)
Pagina afdrukkenELECTRICAL CONNECTION
Speed Control Switch Electrical Connection Diagram
(Standart ENERGY BOX units Electrical Connection Diagram)
N
1
4
3
MAIN
CONNECTIONS
230 V AC
MAIN
CONNECTIONS
INTERNAL CONNECTION UNIT / DO NOT CHANGE
RGS Control Panel Connector Diagram
R
+30.211.70.55.500
N
5
ENERGY BOX
SUPPLY
S
T
+30.210.22.23.283
82
To switch between the models, the fan speed setting ENERGY BOX
350 - 3.500 in accordance with the scheme carry out the
electrical connection.
Setting the fan speed switch is
Mains connection.
ENERGY BOX units connected to
switch the fan speed setting.
if RGS control panel is used for the models between ENERGY BOX
350 - 3.500, make the electrical connection with the connector
in the switch box as shown in figure (L and N terminals).
Unit can be controlled by the control panel with connecting control panel's
A and B terminals as shown. If these is an electric heater, the connectors
which are tagged as R,S,T must be supplied by three-phase energy.
Grid connection must be done to the L and N
R,S,T if necessary) terminals. A and B
terminals are room control panel connections.
flush mounting
24
32
Surface mounting
65
82
Dimensions in mm.
! WARNING
! WARNING
10