Alert 750R-LCD Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alert 750R-LCD. Alert 750R-LCD 15 pagina's. Remote starter and security system

Pagina afdrukken

1. Transmitter Operation

OVErrIdE THE SYSTEm TO TUrN OFF ANTI CAr- JACKINg: Turn the ignition switch from OFF to

ON, and within 0 seconds push valet switch, the siren will stop and the system disarmed

Note: If you use password pin code to double protect the vehicle security, you will need to use it

to completely disarm the system.

P. SYStem'S tRIGGeR CHeCK

(For two-way transceiver operation only)

Press the transceiver F button first, within seconds press (C) button.

It responds with one melody sound and all trigger's records will immedi-

ately displayed on the LCD screen.

Note: If it has no responds then you are out of range.

Q. SYStem'S StAtUS CHeCK

(For two-way transceiver operation only)

When you want to check the system's present status through the LCD

screen, Press the transceiver F button twice, within seconds press

illuminated.

R. DRIVeR PAGING

(For two-way transceiver operation only)

It is useful the event that someone wants to page the driver of the parked

vehicle. Under the ignition switch " off" condition, press and hold the valet

switch for seconds to page the driver, one chirp sound shall be emitted

from the vehicle and the paging melody sound continues you Remote LCD

transceiver and "

" indication flashes on the LCD screen.

S. Dome LIGHt CoNVeNIeNCe DeLAY & SUPeRVISIoN

Upon disarming, the interior lights will remain on for 0 seconds. Note: Turn ON the ignition

switch or arm the alarm will turn off the dome light.

t. IGNItIoN CoNtRoL PoWeR DooR LoCK/UNLoCK

If the vehicles door locks have been interfaced to the system, the system will automatically lock

the vehicle's doors when the ignition is turned " ON" and/or unlock the vehicle's doors when the

ignition is turned " OFF".

U. tRUNK ReLeASe (CHANNeL 3) oUtPUt

Press and hold the

button on transmitter for two seconds to remote

control the trunk release or other electric devices.

V. CHANNeL 4 tImeR CoNtRoL oUtPUt

Press the transmitter (4) and the

(4) buttons at the same time to ac-

tive Channel 4 function. Channel 4 is user-programmable timer output. You

may program the built-in timer to send a ground signal for any time interval

between second and minutes. For instance, this timer output may be

used to turn on the headlight, power window or sunroof. (Factory defaults

setting at momentary output.)

W. CHANNeL 5 tImeR CoNtRoL oUtPUt

Press the transmitter (5) and

(5) buttons at the same time to active

Channel 5 function. Channel 5 is user-programmable timer output. You may

program the built-in timer to send a ground signal for any time duration

from second to 0 seconds. For instance, this timer output may be used to

turn on the headlight, power window or sunroof. (Factory defaults setting at

momentary output.)

X. CHANNeL 6 tImeR CoNtRoL oUtPUt

✱

Press the transmitter

(6) and

(6) buttons at the same time to active

Channel 6 function. Channel 6 is user-programmable timer output. You may

program the built-in timer to send a ground signal for any time duration

from second to 0 seconds. For instance, this timer output may be used to

turn on the headlight, power window or sunroof. (Factory defaults setting at

momentary output.)

Y. Power on memory

This security system is equipped with circuitry that will allow the unit to remember its alarm state

if the power is lost and then reconnected.