Bose 151 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose 151. Bose 151 12 pagina's. Environmental
Ook voor Bose 151: Gebruikershandleiding (19 pagina's), Servicehandleiding (11 pagina's)

Pagina afdrukken

heck the

connections

Check the speaker and receiver or amplifier

connections carefully. Make sure no loose

strands of wire touch across terminals. This

could create short circuits that can damage

an amplifier or receiver.

Tighten any loose connections before you

plug in the receiver or amplifier.

Figure 3

AM171297_09_V.pdf July 15, 2003

Receiver

or Amplifier

est the connections

To make sure your speakers operate

correctly:

Set your receiver or amplifier for MONO

(monophonic) and turn it on. Set the

balance control to normal (centered).

Place the speakers less than 6 inches

(15 cm) apart, facing each other.

Play some deep bass passages of

music through the speakers.

The sound should seem to come from a

point between the two speakers. The bass

should be full and natural. If not, your

connections may be out of phase. Reverse

the connections on the back of one speaker.

Then repeat steps 1 – 3.