Bose AmPlus 100 Installateurshandleiding - Pagina 16
Blader online of download pdf Installateurshandleiding voor {categorie_naam} Bose AmPlus 100. Bose AmPlus 100 20 pagina's. Business music amplifier
Ook voor Bose AmPlus 100: Gebruikershandleiding (10 pagina's), Gebruikershandleiding (6 pagina's)
Pagina afdrukken
All About The AmPlus
Figure 5
AmPlus 50 amplifier controls
Figure 6
Internal remote volume
switch
16
TM
50 Amplifier
AmPlus 50 amplifier controls
INPUTS A
LEVEL
Ch1
Ch1
Ch2
-6
-10
-10
-40 dB
0
-40 dB
+
-
+
-
Inputs – The AmPlus 50 amplifier comes with two balanced inputs. They can be left
and right from a stereo source; two mono sources can also be mixed. Since the
AmPlus 50 amplifier is a single channel amplifier, a stereo source is internally summed
to mono.
Level – Channel 1 level adjust – This potentiometer (pot) controls the signal level of the
Channel 1 input source.
Channel 2 level adjust – This pot controls the signal level of the Channel 2 input
source.
Bass Gain – Use the bass gain pot to increase the output level between 50Hz and
150Hz (affects 50Hz – 150Hz only). This is useful for compensating for poor bass
cabinet loading or high levels of low-frequency ambient noise.
Remote Volume – Connect the remote control unit to the zone 1 (+) pin and the
ground pin.
EQ 1
Power Amplifier Outputs – The 70/100V output is active when the amplifier Mode
Switch is in the 70/100V position. The 4 output is active when the amplifier Mode
Switch is in the 4 position.
Internal High Pass Switch – When this switch is in the "HPF ON" position, frequen-
cies below 150Hz are attenuated at 18dB/OCT. Use this switch for band-limiting high-
frequency speakers in a bi-amplified system.
BASS
REMOTE
GAIN
VOLUME
Ch2
-6
0
OFF +10
High Pass
Filter
C
POWER AMPLIFIER
MODE
70/100V
4-16
+
- +
-
70/100V
4-16