In general
Programming your remote for other components
Turning the system on and selecting the source
Using the VCR sound source
Using a tape deck
Follow the instructions in your Lifestyle
components.
Turn on your component directly or by using its remote control. If you like, you can program
your new Lifestyle
®
remote to control most brands of TVs, VCRs, and other audio equipment.
Use the Volume L or M button on the Lifestyle
lower the volume. Control all other functions at the source, referring to its owner's manual, if
necessary. To begin, make sure the component is turned on and a tape, CD, DVD, etc. is
loaded.
TBD
Press the Tape, VCR, or AUX button on the remote or press Source on the media center until
the desired component is selected. This turns your system on and selects the component
connected to that input. If the system is already on, this button selects the component.
Note: Selecting a source turns the system on in surround (5-speaker) mode.
Press the Speakers button to change the mode.
The appropriate indicators light up on the media center when the system is on and the com-
ponent is selected.
Press VCR on the remote or Source on the media center until VCR appears on the display.
This turns your system on in surround (5-speaker) mode and selects the VCR sound source
connected to the VCR jacks.
To record to a connected tape deck, play the source (AM/FM, CD, or AUX) you want to tape.
In a 2-zone system, play the source in zone 1. Set the tape deck to record.
C
O
M
P
A
N
Y
C
O
M
P
A
N
Y
Playing External Sources
®
system Installation Guide for connecting external
®
remote control or music center to raise or
C
O
N
F
I
D
E
N
T
C
O
N
F
I
D
E
N
T
I
A
L
I
A
L
15