Atlas Copco PHD 26 Instructies voor reparatie - Pagina 2

Blader online of download pdf Instructies voor reparatie voor {categorie_naam} Atlas Copco PHD 26. Atlas Copco PHD 26 8 pagina's.

Special Tools

Pressing-in tool

Required

Assembly tip

Assembly cone

Assembly and

disassembly sleeve

Important!

Before beginning the maintenance work, perform an initial check with a high voltage test according

to VDE (see chapter Electrical and Mechanical Test Instructions).

Before all repair work, pull the power plug from the socket!

Disassembly

Dismantling the

Fix the machine vertically in a holding

nosepiece

device.

Loosen the Allan screws (3) and remove

the nosepiece (1).

Remove the disk springs and the two

washers.

Remove the bearing end plate (2). If

necessary, hit it lightly with a plastic

hammer.

Dismantling the

Remove the washer (3) as well as the O-

intermediate gear

ring.

To expel the snap die (2) lightly hit the

housing with a plastic hammer.

Remove the intermediate gear (1)

together with the disk.

Remove the pins (4).

Repair Instructions No. 162.11/95

PHD 26/ PH(D) 38/ PH 240 D/ PH 350 (D)

276 8000

283 5000

283 1000 (PH 350 (D)/ PH (D) 38)

283 1100 (PH 240 D/ PHD 26)

283 4600

PAGE