Bose SOUNDLINK REVOLVE Handleiding voor probleemoplossing - Pagina 8

Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} Bose SOUNDLINK REVOLVE. Bose SOUNDLINK REVOLVE 9 pagina's. Resetting the speaker
Ook voor Bose SOUNDLINK REVOLVE: Gebruikershandleiding (30 pagina's), Gebruikershandleiding (30 pagina's), Handmatig resetten (2 pagina's), Handleiding voor probleemoplossing (12 pagina's), Problemen oplossen (4 pagina's), Faq (3 pagina's), Snelstarthandleiding (2 pagina's)

Make sure your Bluetooth device supports NFC. Refer to the owner's guide of your device for

more information

Note: Apple smartphones use NFC for Apple Pay but might not support pairing Bluetooth

devices via NFC

Go into the Settings menu of your device and make sure both Bluetooth and NFC are turned on

Tap the NFC touchpoint on the Bluetooth device to the top centre of your SoundLink® speaker.

The device may prompt you to accept pairing

Note: You may have to tap different areas of the Bluetooth device to your SoundLink® speaker

to locate the device's NFC touchpoint. The touchpoint location varies by device but is commonly

located on the back of smartphones.

Reset the device you are trying to pair. This is typically done by rebooting/restarting it or

removing the battery and/or power cable for one minute

Reset the speaker by turning it on and then holding the power button for 10 seconds until it turns

off

A factory reset clears the speaker's language setting and its paired mobile device memory,

returning the speaker to original factory settings. Once reset, turn the speaker on and try again to

pair the device.

Try pairing another NFC-enabled device. If the other device works, there may be an issue with

the first device