Atlas Copco PB 14 C Snelstarthandleiding - Pagina 9
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Atlas Copco PB 14 C. Atlas Copco PB 14 C 11 pagina's.
Pagina afdrukken
1
Fitting the
Pull the spring (2) upwards with a hook
carbon brushes
and insert the carbon brushes (3). Take
care that the carbon brushes face the
spring with the bevelled side upwards.
2
Secure the cable lug of the carbon
brushes with the screw (4).
3
Fit and secure both brush covers (1).
1
Mounting the
Fit the barrel (2) such that its opening (5)
barrel
faces the reception of the inclined shaft
bearing assembly.
2
Press the barrel in with aid of a service
tool.
3
Insert the barrel retainer (3), fit and secure
it with three screws (4).
1
Fitting the striker
Break the edges of the striker bearing clips
(2) before fitting them to the striker (1).
2
Fit the nu–lip–seal (3) and make sure that
it is not twisted.
3
Insert the striker into the barrel (4).
1
Fitting the piston
Fit the nu–lip–seal (2) to the piston (4) and
make sure that it is not twisted.
2
Insert the gudgeon pin (3) and fit the
bearing clip (5).
3
Grease the piston and insert it into the
barrel.
Repair instruction No. 171.5/94
PB 14 D, PB 14 C
1
2
3
4
1
2
3
4
1
2
3
4
5
1
2 3 4
5
PAGE
9