Bose 601 Series IV Direct/Reflecting Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose 601 Series IV Direct/Reflecting. Bose 601 Series IV Direct/Reflecting 11 pagina's. Direct/reflecting speaker system
Ook voor Bose 601 Series IV Direct/Reflecting: Gebruikershandleiding (11 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (11 pagina's), Gebruikershandleiding (18 pagina's)
Pagina afdrukken
Troubleshooting
If you are experiencing
problems with your 601TM speakers:
1.
Turn off the amplifier or receiver and check all the connections
between the speakers and
the amplifier or receiver.
2.
Check your amplifier or receiver owner's guide, since other components
may be the
cause of the problem.
3.
Use the chart below as troubleshooting
guidelines. If this does not solve the problem,
contact your authorized Bose _'dealer to arrange for service. Refer to the address list
enclosed in the product packaging for correct phone numbers.
Problem
Possible cause
How to find out
Solution
One speaker
doesn't play, or
sounds distorted.
Amplifier or receiver
channel, speaker, or
speaker wire may be
defective.
Switch the LEFT and
RIGHT connections
on the back of your
speakers.
If the previously
"broken" speaker
now plays properly,
and the other one
does not, one chan-
nel in the amplifier
or receiver, or that
speaker wire is
probably defective.
If the original
speaker still does
not play properly,
call Bose or your
retailer to arrange
for service.
Both speakers do
not play, or sound
distorted.
Amplifier or receiver
may be defective.
Disconnect the
amplifier or receiver
from the speakers.
Reconnectthe
speakers to another
amplifier orreceiver
that works properly.
High sound volume
drops suddenly.
The automatic pro-
tection circuit has
activated to protect
the speakers from
electrical stress or
overload.
Lower the volume. If
it returns to normal,
your speakers' auto-
matic protection cir-
cuit caused the
sudden drop. This
volume reduction
protects the speak-
ers from electronic
stress and overload.
Return the volume
to a reasonable
level; avoid
extremely high vol-
ume settings.
No bass or dimin-
ished sound quality.
Wiring may be out-
of-phase.
Check connections.
They should bein
phase(+ to + and-
to -).
A_ustconnections,
ifthey are out of
phase.
8
October25,
2001
AM257731
O0 V.pdf