Bose Acoustimass 10 Series IV Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose Acoustimass 10 Series IV. Bose Acoustimass 10 Series IV 16 pagina's. Home entertainment speaker systems
Ook voor Bose Acoustimass 10 Series IV: Gebruikershandleiding (33 pagina's), Handleiding voor snelle installatie (1 pagina's), Gebruikershandleiding (44 pagina's), Gebruikershandleiding (25 pagina's)

English

Español

Problem

System does not function

at all

No sound

No surround sound

No bass

Not enough or too much

bass

Sound is distorted

Français

If you have a problem with your Acoustimass

and try the following solutions. If you still have a problem, contact your Bose

arrange for service. To contact Bose directly, refer to the address list included in the carton.

What to do

• Make sure the receiver and powered Acoustimass module are plugged into an operating

AC outlet and that the receiver is turned on.

• Be sure to select an audio source on the receiver (video, CD, DVD, tuner).

• Increase the volume.

• Disconnect any headphones.

• Check the speaker connections.

• Make sure that both the powered Acoustimass module and the receiver are plugged in.

• For digital sound, be sure a coaxial or optical cable connects the digital output of the

DVD player with the digital input on your receiver.

• Be sure the audio source selected is correct. For example, select DVD audio on your

receiver to hear the DVD sound.

• Make sure the source material contains surround sound.

• If you are using the Dolby Pro-Logic mode on your receiver, make sure surround sound

is turned on.

• Be sure the source material (DVD, laser disc, or broadcast programming) is Dolby Digital

encoded.

• Be sure your receiver is processing a signal from a Hi-Fi VCR, stereo TV, laserdisc, or

DVD player, or other surround sound source.

• If you are using digital programming, verify that the settings are correct at the receiver.

• Be sure the speaker connections from the receiver to the amplifier are in the correct

phase, red-collared wire to red jack (+ to + and – to –).

• Move your Acoustimass module closer to a wall or corner to increase bass. Move it

farther from a wall or corner to decrease bass.

• Adjust the LFE level or Room Compensation control.

• Make sure speaker wire is not damaged.

• Reduce the volume of external components connected to the receiver.

speaker system, turn off your sound source

EFERENCE

dealer to