Bose Acoustimass 6 Series III Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose Acoustimass 6 Series III. Bose Acoustimass 6 Series III 18 pagina's. Home theater speaker sytem
Ook voor Bose Acoustimass 6 Series III: Handleiding voor snelle installatie (1 pagina's), Gebruikershandleiding (44 pagina's), Gebruikershandleiding (16 pagina's), Gebruikershandleiding (25 pagina's), Gebruikershandleiding (23 pagina's)

Setting Up

Connecting the speakers

Figure 5

Cube speaker connections

to Acoustimass module

CAUTION: Never connect the cube speakers directly to a receiver output. Always connect

them to the powered Acoustimass

CAUTION: Never use broken or frayed wiring, which can result in electrical shock or damage

to your system. The supplied cables are not intended for in-wall installation. Check local build-

ing codes or enlist a qualified installer.

Three individual 20-foot (6.1 m) speaker cables connect the center, right, and left front cube

speakers to the Acoustimass module (Figure 5). Be sure to match the correct cable with the

corresponding speaker location. Front speaker cables have blue RCA connectors at one end

with L (left), R (right), or C (center) molded into the connectors. The other ends of the cables

have two wires. The red collars on the + wire are labeled LEFT, RIGHT, or CENTER.

module, then connect the module to the receiver.