Bose Sub2 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose Sub2. Bose Sub2 14 pagina's. Powered bass modules
Ook voor Bose Sub2: Firmware bijwerken (4 pagina's), Firmware bijwerken (44 pagina's), Voorlopige technische gegevens (9 pagina's), Handmatig (2 pagina's)

Bose Sub2 Gebruikershandleiding
Setup

Connecting to an L1 Pro32 with a SubMatch Cable

q
Sub1/Sub2
1.
Plug the SubMatch cable into the SubMatch Input on a Sub1/Sub2.
2. Plug the other end of the SubMatch cable into the SubMatch Output of the L1 Pro32.
3. Plug the power cord into the Power Input on the L1 Pro32.
4. Plug the other end of the power cord into a live electrical outlet.
Note: Do not power on the L1 Pro or the Sub until after you've connected your sources. See the L1 Pro32
owner's guide at PRO.BOSE.COM for more information about connecting sources to an L1 Pro32.
5. Press the Standby Button on the L1 Pro32 then press the Standby Button on the Sub. The LEDs will
illuminate white while the L1 Pro and Sub are on.
Note: Press and hold the Standby Button for 10 seconds to reset the Sub to factory settings.
When using two Subs via SubMatch cable connection, first turn on the Sub connected directly to the
L1 Pro32, then turn on the second Sub.

AutoOff/Low-power Standby

After four hours of no use, the Sub will enter AutoOff/Low-power Standby mode to save power. To wake the
Sub from AutoOff/Low-power Standby mode, press the Standby Button.
Note: Disable AutoOff/Low-power Standby mode by pressing and holding the Phase/Pattern Button and Line
Output EQ button simultaneously for 10 seconds. Enable AutoOff/Low-power Standby mode by repeating this
step. Disabling AutoOff/Low-power Standby mode will result in higher energy usage when the Sub is not in
use.
8 • English
w
L1 Pro32
r
e
Sub1/Sub2 Powered Bass Module • Owner's Guide
PRO.BOSE.COM
t