Bose WAVE RADIO III Gebruikershandleiding - Pagina 15
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose WAVE RADIO III. Bose WAVE RADIO III 28 pagina's. Owner's guide
Ook voor Bose WAVE RADIO III: Gebruikershandleiding (28 pagina's), Gebruikershandleiding (24 pagina's), Gebruikershandleiding (26 pagina's), Gebruikershandleiding (28 pagina's), Servicehandleiding (10 pagina's)
Pagina afdrukken
Introduction
Music System III has two independent
®
The Wave
alarms, Alarm 1 and Alarm 2.
Each alarm can be set for:
• Time
• Wake-up source: buzzer, radio, or CD
• Volume
Using the Alarm buttons
Using the Alarm buttons on the bottom of the remote
you can setup and operate each alarm:
Press to turn Alarm 1 on or off.
• Press to activate the Alarm Setup
mode and view Alarm 1 settings.
• Press again to view Alarm 2 settings.
• Press again to exit the Alarm Setup
mode.
Press to turn Alarm 2 on or off.
Alarm status indicators
The upper right-hand corner of the display shows the
alarm status indicators if the alarm is set:
Alarm 1
Alarm 2
Example: Alarms 1
and 2 are set
Alarm 1 time
AM
PM
AM
PM
Alarm 2 time
S
ETTING AND
Setting the alarms
You can choose the settings for each alarm by activating
the Alarm Setup mode and displaying the settings for the
alarm you want to change.
To setup Alarm 1 or 2:
1. Press Alarm Setup to activate the Alarm
Setup mode and display the settings for
Alarm 1.
The alarm number and
time start flashing.
Then the display
shows you the current
settings for Alarm 1.
2. Using the Time buttons, set the
alarm time.
3. Select your wake-up source:
• BUZZER
is the factory alarm setting.
• Press
to choose a radio station.
• Press
to choose a track.
4. Press Volume up or down to set
the volume level of the selected
wake-up source.
5. Press
to enter the Alarm 2 setup mode. Repeat
Steps 2-4 to set up Alarm 2.
6. Press
again to exit the Alarm Setup mode.
The alarm you set is turned on and the alarm time
appears on the display:
U
A
SING THE
LARMS
Flashing
Alarm number
and time
English – 15