3M G5 Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} 3M G5. 3M G5 10 pagina's. Drive-thru systems
Ook voor 3M G5: Snelle referentiehandleiding (2 pagina's), Technisch bulletin (6 pagina's), Technisch bulletin (2 pagina's), Snelstarthandleiding (3 pagina's), Technisch bulletin (12 pagina's), Handmatig (8 pagina's)

8. Power up the G5 Basestation and close the Basestation cover

You may now power up the system by plugging in the Power Supply's barrel

connector to the 12V input terminal on the Basestation, as illustrated:

To replace the base station cover:

-- Verify there are no obstructions (tools, etc.) in the way of the cover being closed.

-- Align the top edge of the cover with the base.

-- Swing the bottom half of the cover down into place and gently push it against the base

until it locks into place.

Tighten the two screws located at the bottom of the cover.

9. Register (G5 and/or XT-1) Headsets to the basestation

In order to register headset(s) to the G5 Basestation, you will have to:

• Enter the Configuration mode on the basestation

• Register headsets from the Registration option on the System Menu

Enter Configuration Mode:

Configuration mode is a passcode-protected area that contains most of the configuration options for the G5 Basestation system.

Using the access provided for users, it is possible to set up all of the functionality of the system.

To enter the configuration mode:

1. From the Run mode screen, enter your user passcode.

2. Press Mode. The display will show the user name and ID number

(e.g., Installer1ID = 1 or User1ID = 1)

3. Press Mode again and the system will display the Main Menu with options to

select System Menu or Greeter Menu

4. Use keypad's arrow keys to navigate to System Menu and press Enter.

Notes:

The default Installer password is 12345 and the default User password is 1234

From the System Menu

• Select 04 Registration > 1 Add New Headsets.

• Power on the headset when prompted.

Or in the case of a G5 headset, insert he battery to automatically power on the headset.

• Wait up to two minutes for {Headset xxxxxxx Has Been Registered!} to appear at the bottom of the display.

• Repeat the steps above for additional headsets.

• Press Mode when finished.

10. Connect laptop to G5 Basestation Web Server

Please refer to the document, "TB-160 Logging onto G5 Basestation Web Server.pdf".