23zero SABER Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 23zero SABER. 23zero SABER 12 pagina's.

SABER USER MANUAL

The Saber roof top tent has 3 x optional roof bars included. These are fitted to the side channels

on the roof lid. Slide the heads of 2 x 20mm M8 bolts into the channel of the roof lid near desired

location. Locate the holes on the bottom of the bracket (long side) and place over the bolts. Fit

washer and Nylok nut and tighten. Repeat for opposite side.

Note: Some hardware may need to be removed to allow bracket bolts to slide to desired position.

To fit roof rail to brackets, slide 2 x 20mm M8 bolts into each channel on the flat edge of the rail

and place over the holes of mounted bracket. Fit washer and Nylok nut and hand tighten. Repeat

for opposite side. Position roof bar so it is centred on the Saber and tighten all nuts. Repeat this

process for remaining roof bars. Fit all rubbers and end caps.

Note: The roof bars supplied with the Saber roof top tent are not designed to carry significant

loads. A maximum of 20kg can be carried on top of the Saber providing this weight is spread

evenly amongst all three bars. Load weights greater than 20kg will void any warranty.

When adding additional weight to the top of the Saber consideration must be given to the overall

weight rating capacity of your vehicle's roof and roof rack.

Please ensure you are aware and understand the following:

•

Your vehicle's maximum roof load rating.

•

Your roof rack's maximum load rating including off-road capacity.

The maximum amount of weight you can safely add to a vehicle's roof / cargo area differs according

to make and type of vehicle including aftermarket additions such as roof racks / bars.

Important: Before each trip please check that all roof bar and bracket fixings are tight and

in good order before adding load.

Roof bars