Bose Acoustic Wave music system Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose Acoustic Wave music system. Bose Acoustic Wave music system 20 pagina's. Music system power pack
Ook voor Bose Acoustic Wave music system: Gebruikershandleiding (30 pagina's), Gebruikershandleiding (6 pagina's), Gebruikershandleiding (22 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (5 pagina's), Gebruikershandleiding (22 pagina's)

Setting Up

Connecting the multi-disc changer to your Acoustic Wave

Figure 3

Connecting the multi-disc

changer to the Acoustic

Wave

music system

Figure 4

Plugging in the power cord

On the back of the multi-disc changer there are two cables (Figure 3) that connect to your

Acoustic Wave

music system.

1. Insert the two connectors of the AUX input cable into AUX IN jacks on the back of the

Acoustic Wave

music system. Be sure to match the colors of the connectors and jacks:

red to red, and white to white.

2. Insert the plug of the AC power cable into the AC power receptacle on the back of the

Acoustic Wave

music system.

Power jack

AC power cable

Note: The changer comes supplied with a detachable power cord, similar to the one provided

with the Acoustic Wave

music system. You will need to use only one of these two supplied

power cords.

3. Plug the small end of the detachable power cord into the power jack on the back of the

changer (Figure 4).

CAUTION: If you will be connecting auxiliary components to the changer, refer to "Connect-

ing other sound sources" on page 13.

4. Plug the other end of the power cord into an AC (mains) wall outlet and your setup is

complete.

Note: When the multi-disc changer turns on after you plug it in, "PLEASE WAIT" ﬂashes on its

display for a few seconds. When the ﬂashing stops, you can load and play the changer.

music system

AUX input cable