Bose B2000 Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose B2000. Bose B2000 19 pagina's. Power amplifiers

7. BOSE

EQ Cards

7.2 B2000 EQ card fitting

Locate the EQ Card sockets. Insert the EQ Card into the socket, observing the

orientation of the mating connector. Remove the bypass jumper link for the channel

(A = J104 or B = J204) and replace horizontally as shown below:

Bypass active channel A

Jumper location channel A

If you want to activate the high-pass filter function of the EQ Card, you need to fit the

jumper (that is supplied within the packaging that comes with the amplifier) to the

link HPF pins for the channel. Note: When using the BOSE series II-S EQ cards the

HPF selection is made on the EQ card and not on the amplifier board.

Front of

Amplifier

EQ card active channel A

Jumper location channel B

Front of

Amplifier