Bose Lifestyle 8 Series II Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose Lifestyle 8 Series II. Bose Lifestyle 8 Series II 41 pagina's. Bose lifestyle 8 series i: owners guide
Ook voor Bose Lifestyle 8 Series II: Gebruikershandleiding (22 pagina's), Gebruikershandleiding (41 pagina's), Gebruikershandleiding (33 pagina's)
Pagina afdrukken
Connecting the speakers and Lifestyle
Figure 5
Speaker cable connections to a
cube speaker
AM252876_03_V.pdf
Once you have selected locations for your music system, connect the speakers.
CAUTION: Make sure all components are unplugged from the power outlet before you
begin hooking up the system.
Connecting the cube speakers to the Acoustimass
Each speaker cable contains two wires. The wire marked with a red collar is positive (+) and
the plain one is negative (–). These wires match the positive (red) and negative (black) termi-
nals on the back of each speaker. To lengthen the cable, use heavy-duty RCA extension
cables or splice in 18-gauge or thicker cord (connecting + to + and – to –). To purchase
cables, see your dealer or electronics store, or call Bose
Note: The surround cables are joined together for your convenience, providing an easy-to-
use cable for connecting the surround speakers. To run the cables in different directions from
the Acoustimass module, simply pull apart the cables as needed.
1. Match the correct cable to the corresponding speaker location.
• Front speaker cables have blue connectors at one end, with L, R, or C molded into the
connectors. The red collars on the + wire are labeled LEFT, RIGHT, and CENTER.
• Surround speaker cables have orange connectors at one end, with L or R molded into
the connectors. The red collars on the + wire are labeled LEFT and RIGHT.
2. Connect the wire end of one speaker cable to the terminals on the rear of the matching
cube speaker array.
a. Press the terminal tab on the back of the cube to insert the marked wire into the red
terminal and the plain wire into the black terminal. Release the tab to secure the wire.
b. Repeat this step for each of the five cube speakers. (See Figure 5.)
CAUTION: Make sure no strands of wire from any terminal touch any other terminal.
Bridged wires create short circuits that affect proper operation of your system.
3. Connect each cable to the corresponding jack on the Acoustimass module.
a. Plug the blue connectors into the matching left front, center, and right front jacks.
b. Plug the orange connectors into the matching left surround and right surround jacks.
October 22, 2001
®
music center
®
customer service.
Setting Up
®
module
9