Bose PM8500 Gebruikershandleiding - Pagina 29

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose PM8500. Bose PM8500 44 pagina's. Configurable professional power amplifier
Ook voor Bose PM8500: Technisch gegevensblad (6 pagina's), Installatie- en veiligheidsvoorschriften (21 pagina's)

Pagina afdrukken
Bose PM8500 Gebruikershandleiding
pro.bose.com
CONFIG
➞
Output Config
Input Routing
Description
Available Controls
Options
Notes
CONFIG
Output Config
➞
Input Routing
Description
Available Controls
Options
Notes
English
MAIN MENU < CONFIGURE < CONFIG OUTPUTS
This display allows you to configure the output section of the amplifier for various output modes.
To access Output Configuration, use the rotary encoder dial from the DSP menu to highlight, then press to select.
Navigation Soft Key: Back to CONFIG menu.
Menu Soft Key #5: Enables the selection of the output channel (or output groupings) using the rotary encoder dial.
Menu Soft Key #1: Enables the selection of an output configuration for the displayed output channel. Use the rotary encoder to adjust
the selected parameter. Once the desired mode is highlighted, press the rotary encoder to select.
For Channels 1 and 2
MONO
Ch1+2 V-Bridge (Low-Z)
Ch1+2 V-Bridge (70V)
Ch1+2 V-Bridge (100V)
Ch1+2 I-Share (Low-V)
Ch1+2+3+4 Quad (Low-Z)
Ch1+2+3+4 Quad (70 V)
Ch1+2+3+4 Quad (100 V)
For Channels 5 and 6
MONO
Ch5+6 V-Bridge (Low-Z)
Ch5+6 V-Bridge (70V)
Ch5+6 V-Bridge (100V)
Ch5+6 I-Share (Low-V)
Ch5+6+7+8 Quad (Low-Z)
Ch5+6+7+8 Quad (70 V)
Ch5+6+7+8 Quad (100 V)
Selection of channels 1-4 and 5-8 will display modes that offer possible combined channels available only to those respective channels.
MAIN MENU < CONFIG < INPUT ROUTING
This display allows you to assign a mix of input signals to each of the output channels.
To access Input Routing, use the rotary encoder dial from the DSP menu to highlight, then press to select.
Navigation Soft Key: Back to CONFIG menu.
Rotary Encoder: Scrolls through output channels.
Menu Soft Key #5: Enables the selection of two input channels pages. Use the rotary encoder dial to toggle between input channel groupings A-D
or E-H.
Menu Soft Key #1-4: Enables the selection of one of the displayed input channels. A second press of the soft key will toggle between states "OFF"
and a user-adjustable gain value. Once an input channel is highlighted and showing a gain value, use the rotary encoder wheel to dial the desired
amount of signal to be applied to the displayed channel.
OFF, -60dB to 0dB in 1dB increments
Bose suggests that you first configure output modes (MAIN MENU < CONFIG < OUTPUT CONFIG) before performing input routing.
For Channels 3 and 4
MONO
Ch3+4 V-Bridge (Low-Z)
Ch3+4 V-Bridge (70V)
Ch3+4 V-Bridge (100V)
Ch3+4 I-Share (Low-V)
Ch1+2+3+4 Quad (Low-Z)
Ch1+2+3+4 Quad (70 V)
Ch1+2+3+4 Quad (100 V)
For Channels 7 and 8
MONO
Ch7+8 V-Bridge (Low-Z)
Ch7+8 V-Bridge (70V)
Ch7+8 V-Bridge (100V)
Ch7+8 I-Share (Low-V)
Ch5+6+7+8 Quad (Low-Z)
Ch5+6+7+8 Quad (70 V)
Ch5+6+7+8 Quad (100 V)
User guide
User Guide Page 29