Bose PowerShare PS604D Installatiehandleidingen - Pagina 11
Blader online of download pdf Installatiehandleidingen voor {categorie_naam} Bose PowerShare PS604D. Bose PowerShare PS604D 24 pagina's. Adaptable power amplifiers
Pagina afdrukken
pro.Bose.com
Product Details
PowerShare PS604D/PS404D
Front Panel
q
w
SIGNAL
1
POWER
LIMIT
Power switch:
q
Power LED:
w
Input Signal LED:
e
Output Limit LED:
r
Rear Panel
q
w
PRIMARY
SECONDARY
INPUT
1
2
3
4
Dante ports: Ethernet ports for connection of Dante® and ControlSpace devices. Transports up to four
q
digital audio channels between a Dante device and the amplifier. The amplifier supports a THRU path for
daisy-chaining to other Dante devices in switched mode. Dante audio and ControlSpace control can be
separated using Isolated mode.
Analog Input: Line-level input for balanced analog audio signals.
w
Mute port: Normally open or normally closed (consult ControlSpace Designer help system) dry contacts
e
can mute all outputs.
Reset button: Resets the amplifier to factory default settings (see Resetting the PS604D/PS404D on page 14).
r
Output Attenuation controls: Output attenuation controls for each output. Turn the controls clockwise to
t
decrease attenuation and counter-clockwise to increase attenuation.
Analog Output: Eight-pin Euroblock connector for loudspeaker connections.
y
Power input: Power cord connection (IEC 60320-C14 inlet). Removing the power cord when the amplifier
u
is on is equivalent to powering down using the front panel power switch, and is an acceptable power-down
method.
Installation Guide • PowerShare PS604D/PS404D
e
r
2
3
4
On/Off AC power.
Power or fault state indication.
Each LED operates independently.
Each LED operates independently.
Switched* Isolated
*Connect only one Cat 5 to same network
Secondary
D/C
C
C = ControlSpace Control
Primary
D/C
D
D = Dante Audio
Green (solid): Power is on
Green (blinking): Unit is in standby mode
Amber (solid): Thermal fault
Red (solid): Power supply fault
Green: Signal present
Amber: Input is near clipping
Red (solid): Indicates a fault
Red (blinking): Input is clipping
Amber: Amplifier limiting an output
Red (solid): Indicates a fault
Red (blinking): Amplifier muted
e
r
t
MUTE
OUTPUT ATTENUATION
0
0
1
2
Product Details
y
OUTPUT
4
1
2
3
CLASS 2 WIRING
0
0
3
4
u
PowerShare PS604D
Adaptable Power Amplifier
100-240V ~ 50/60HZ
700W MAX
English • 11