Bose SoundTouch SA-4 Handmatig - Pagina 32
Blader online of download pdf Handmatig voor {categorie_naam} Bose SoundTouch SA-4. Bose SoundTouch SA-4 34 pagina's. Amplifier
Ook voor Bose SoundTouch SA-4: Gebruikershandleiding (42 pagina's), Gebruikershandleiding (36 pagina's)
Pagina afdrukken
- 1. About Your Soundtouch™ Sa-4 Amplifier
- 2. Adding the System to Your Wi-Fi
- 3. Installing the Soundtouch™ Sa-4 Amplifier
- 4. Installing the Soundtouch™ Wireless Adapter
- 5. Connecting Speakers to the Sa-4 Amplifier
- 6. Alternate Setup Method
- 7. Troubleshooting
- 8. Appendix A: Sa-4 Amplifier Connector Panel
Appendices
Appendix C: Wall mounting the
SoundTouch™ wireless adapter
Follow these instructions to wall mount your SoundTouch
either vertically with the connector panel facing left, or horizontally with the con-
nector panel facing up.
Note: Mounting hardware must be purchased separately. If the mounting
hardware instructions differ from these instructions, follow the mounting
hardware instructions.
• Wood Mounting: Mount to 1 in. (25.4 mm) or thicker wood. Drill hole with
a ⅛ in. (3.17 mm) drill. Use (2) #8x1¼ in. (32 mm) pan-head wood screws.
• Wallboard Mounting: Mount to ⅜ in. (9.5 mm) or thicker wallboard. Drill
pilot hole with a ³/
wall anchors, and (2) #8x1¼ in. (32 mm) pan-head wood screws.
¼ in. (6.35 mm)
above surface
1.
Mark holes on the wall 6¼ in. (158.7 mm) center-to-center.
2.
Drill holes. Insert anchors (if used).
3.
Install screws. Leave the screw heads ¼ in. (6.35 mm) above wall surface.
4.
Position SoundTouch
32 - English
Vertical
orientation
Connector
panel is
facing left.
in. (4.76 mm) drill. Use (2) #6-8x1 in. (25.4 mm) plastic
16
Wood
wireless adapter onto screws. Press firmly into place.
™
Horizontal
orientation
Connector panel
is facing up.
™
Wallboard
¼ in. (6.35 mm)
above surface
wireless adapter. Install