Bose Aviation Headset X Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bose Aviation Headset X. Bose Aviation Headset X 36 pagina's. Owner's guide
Ook voor Bose Aviation Headset X: Gebruikershandleiding (36 pagina's), Handleiding voor snelle installatie (1 pagina's), Gebruikershandleiding (16 pagina's), Gebruikershandleiding (36 pagina's)

ETTING

OUR

EADSET

Figure 10

Installing the two batteries

EADY FOR

Inserting batteries

Insert the two supplied alkaline AA batteries (IEC LR6) into the

control module (Figure 10).

CAUTION: The battery compartment is designed to prevent inadvertent

reverse polarity from installing the batteries incorrectly. If the batteries do

not seem to fit correctly, do not force them in. Forcing an improper connec-

tion will cause permanent damage to the control module.

For permanent installation of the headset, the harness (material

number 323172-0010) is installed into the aircraft. The 3-foot

wiring harness includes a self-latching, precision designed, quick-

connector for panel mounting in the aircraft. The connector is

mechanically keyed to ensure proper mating. To order additional

harnesses, call Bose at 1-800-242-9008.

Note: The aircraft panel connector must be mounted and docu-

mented by qualified personnel to perform this type of avionics

installation into the aircraft being used. Consult your local FAA office

or aviation authorities to determine the appropriate documentation

required.

The Bose connector (material number 323172-0010) is TSO

approved (C-57a and C-58a) together with the Bose Series II

Aviation Headset and the Bose Aviation Headset X.

When the quick-connector is installed, the cable leading from the

control module connects to it. Match the narrow bar on the cable

end to the slot on the connector. Press in until the two parts engage

(Figure 11 on page 15).

To release the cable, pull back on the sleeve near the end of the

cable. Then gently remove the cable from the connector.