AirTek AT90 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AirTek AT90. AirTek AT90 11 pagina's.

1. Air Filter---- unload and leaning

Air Filter is located at back of air-absorb grille and should be leaned at least two weeks

interval.

Unload steps:

A. Unload screws.

B. Take off and pull out air-absorb grille by hand.

C. Pull up the air filter

D. Tap the air filter lightly or clean the dirt from it using a vacuum cleaner. if dirt is

conspicuous, wash with a solution of detergent in lukewarm water. Dry well in the shade

and replace the air filter.

Installation steps:

Please see above steps: from D to A.

5. Notice of operation

1. When displace the unit, do not slope over 45·to avoid any damaging of the compressor.

2. The unit should be operated between 5℃～32℃.

3. When dehumidifying, because of the heat resulted from the running compressor, the

indoor temperature will rise 1℃～3℃.It's normal, and don't mind.

4. When indoor temperature is below 10℃, and the ambient absolute humidity is quite low, it

is unnecessary to use the machine.

5. Air inlet and air outlet should be at least 10cm away from the wall.

6. Try to seal the room to enhance the dehumidification effect.