Drolo Molecular Disruption Device Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Drolo Molecular Disruption Device. Drolo Molecular Disruption Device 3 pagina's.

tap footswitch:

overload:

exp input:

By default I set the pedal up to have unity gain against the bypassed signal but if you want you can adjust a volume trim

pot inside the pedal.

For details about the available patches and their function visit this page:

http://www.davidrolo.com/effects/molecular-patches/

Thanks :)

David

http://www.davidrolo.com

depending on the exp/pot_0 selector setting it will set the pot_0 value to its minimum or

maximum when pressed. In some patches it can be used to tap a tempo or latch a state (hold)

this LED indicates when the signal exceeds the processor's headroom.

It's mainly for when the signal is clipping within the algorithm because the audio input is limited

externally. The inputs of the processor can normally not be damaged. You might notice this

when you go crazy with a delay or a flanger's feedback oscillation for example.

So just an indication, nothing to worry about.

can be used to externally control pot_0. Most commercially available expression pedals using a

TRS plug should work. The value is not really critical, although I would not go lower than 10k.

Some examples are the

You need to use TRS plugs and cables. NO MONO PLUGS OR CABLES! These will short out the

voltage inside the pedal and damage it.

Here is how such a TRS plug looks like.

The exp jack is connected to the pedal like this:

sleeve : ground

ring: 3.3V supply voltage

tip: controlling (varying) pin

If you really know what you are doing you can actually use a control voltage instead of a

resistance based controller. But you need to consider the connections and never exceed 3.3V. If

you do you will damage the pedal.

If you have any doubt when deciding what to connect to the expression input please send me an

email and I will verify that everything is safe.

Moog EP-2, Roland EV-5, and M-Audio EX-P.