Drolo stamme n V4 Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Drolo stamme n V4. Drolo stamme n V4 5 pagina's.

Controls

expression

power

input (TRS)

supply (9v)

exp

dry

level

control

record/tap

switch

audio

output

input

wet

sample

level

rate

ctrl/smplrt

mode

selector

switch

wet/dry:

Controls the level of the wet and dry signals. Unity gain is around

noon position.

sample rate

Controls the sample rate at which the DSP chip will run. It goes from

around 10kHz to 40kHz. At the lower extreme of this control you

might hear noise as the sample rate gets in the audio range.

mode selector:

Select one of the 8 modes.

When you change to a different mode, any recording will be deleted

and both of the footswitches get reset to their off position.

Its function will depend on the selected mode.

on switch:

When engaged, it will immediately start looping the recording.

If you give it a short tap (<0.3sec) it acts in latching mode.

If you press it for more than 0.3sec you are in momentary mode.

record/tap switch:

If you give it a short tap (<0.3sec) it acts in latching mode.

If you press it for more than 0.3sec you are in momentary mode.

(Except in TT mode where it is only used to tap in the tempo)

ctrl/smplrt switch:

Allows you to choose whether the expression input will control the

sample rate knob (right) or the control knob (left)