Dromone Multi-Lock Quick Coupler Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dromone Multi-Lock Quick Coupler. Dromone Multi-Lock Quick Coupler 18 pagina's. Excavator automatic quick coupler
Pagina afdrukken
ment in which the coupler is likely to be
working can be extremely harsh and det-
rimental to all types of machinery. For this
reason, Dromone Engineering highly
recommends that; as well as the regular
maintenance checks, certain components
be replaced as a matter of course after
reaching a pre-specified no. of working
hours.
Intermittent problems can be symptoms
of imminent failure and if these are ex-
perienced with key control components
such as the control box or solenoid valve,
these components should be replaced im-
mediately.
Details of specific components and their
expected normal working life can be
found in the Maintenance section of this
manual. Please take the time to become
acquainted with these components and to
monitor their working age.
Only genuine Dromone parts must
be used to service this Quick Cou-
pler.
Dromone Engineering Ltd. reserves
the right to waive liability if non
genuine parts are fitted to this Cou-
pler.
11. It is important to note that if you or
your representative is responsible for the
initial installation of the Dromone Quick
coupler, especially in regard to the hy-
draulic / electrical system; you must take
the full responsibility to make sure the
installation is carried out in strict accor-
dance with Dromone Engineering's in-
structions. Any failure to do so may allow
the unsafe operation of the coupler and
result in serious injury or death, with the
installer being found to be liable.
12. Other than the structural integrity of
the Dromone Multi Lock Quick Coupler,
QMS 22
REV: D - JAN2012
Dromone Multi– Lock Quick Coupler
Dromone Multi– Lock Quick Coupler
6
the most important component(s) in this
coupler are the two hydraulic cylinders
and the front and rear pin locking mecha-
nisms.
It is imperative that to ensure the contin-
ued safe and effective use of this coupler,
a daily check be carried out to monitor
wear, blockages and other damage that
can possibly occur to the detriment of the
system's safe operation.
While every effort has been made by Dro-
mone Engineering Ltd. To provide a safe,
durable and effective product to work in a
typically harsh environment, it must be
stressed that it is the responsibility of the
owner / user to keep the system serviced
and in good working order. The machine
operator and / or owner could be held to
be negligent if they either fail to keep the
system in good order.
13. It is essential to ensure continued
safe operation of the Dromone Multi Lock
Quick Coupler, that along with regular
maintenance checks and services carried
out on the coupler; close attention be
paid to the presence and condition
(legibility) of all the decals in the ma-
chine's cab.
If one or more of these decals become
damaged or lost, it is essential that they
be replaced immediately. Dromone Engi-
neering has supplied an extra set of de-
cals with this manual for this eventuality.
If you have not received these decals you
should contact your dealer immediately. If
you have further need for decals, you can
contact Dromone directly at the address /
Tel no. printed in this manual.
PLEASE MAKE SURE THAT THE IN-
CAB OPERATION INSTRUCTION DE-
CALS ARE MOUNTED IN THE MA-
CHINE CAB IN AN EASILY VISIBLE
Author:EOD
Approved:MS