Drop SC-64 Installatiehandleiding - Pagina 12

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Drop SC-64. Drop SC-64 20 pagina's.

INSTALLATION INSTRUCTIONS

System Setup

Connect drain line to barbed drain adapter and run to appropriate discharge point. Use

a 1/2" minimum pipe size for the drain. Use a 3/4" drain line for runs that exceed 20 feet.

Make connection to a sanitary waste system through an air gap of 2 pipe diameters or

1", larger. Do not tee into any other drain lines.

STAND PIPE

Remove brass compression nut from the

softener control valve. Take brine tubing

(packaged with brine tank) and slide the

brass nut and plastic ferrule onto one end

of the tubing. Find the plastic tubing insert

(taped to the brine well cap inside the brine

tank) and insert it into the end of the tubing.

Next, insert the tubing into the control valve

and tighten the nut.

Nut

Insert

Ferrule

BRINE LINE CONNECTION TO

CONTROL VALVE

Discharge Options

LAUNDRY TUB

Inside the brine tank, remove the cap from

the top of the brine well. Feed the other end

of the brine tubing through the hole in the

side of the brine tank, and firmly insert it

all the way into the push-lock elbow fitting

inside the brine well. When this tubing is

fully inserted, the fitting will grab the tubing

and hold it in place.

BRINE LINE CONNECTION TO

BRINE TANK

FLOOR DRAIN