DROPSA 0400605 Gebruikers- en onderhoudshandleiding - Pagina 2
Blader online of download pdf Gebruikers- en onderhoudshandleiding voor {categorie_naam} DROPSA 0400605. DROPSA 0400605 10 pagina's. Pneumatic pumps trolley mounted
Pagina afdrukken
1. INTRODUCTION
This User and Maintenance Manual refer to Dropsa's "pneumatic pump trolley mounted".
E' possibile ottenere l'ultima versione richiedendola all'Ufficio Tecnico Commerciale, oppure consultando il nostro sito web
http://www.dropsa.com.
Il presente manuale di uso e manutenzione contiene informazioni importanti per la salvaguardia della salute e della sicurezza del
personale che intende utilizzare questo prodotto.
E' necessario leggere con attenzione questo manuale e conservarlo con cura affinché sia sempre disponibile agli operatori che
intendono consultarlo.
2. GENERAL DESCRIPTION
Trolley mounted pneumatic pumps are particularly suited for the lubrication of male, ball and gate valves.
They can be easily transported to the area of use as they are installed on a trolley.
The trolleys are made in two versions to hold 5 kg and 25 kg barrels.
3. PRODUCT IDENTIFICATION
Machine identification label is located on the front side of the reservoir and contains product serial number, input voltage and
details of the operating parameters.
4. TECHNICAL CHARACTERISTICS
The pump is made up of a series of components with the following characteristics:
Empty weight
Pumping system
Compression Ratio
Flow rate at 6 bar
Max. pressure
Pressure on sealant with follower plate set at 2 Bar
Air inlet connection
Sealant outlet connection
Sealed drums used
Operating temperature
Humidity
Permitted lubricants (1)
Operating temperatures
Noise
Note. The specifications refer to the temperature of use of +20°C (+68°F)
(1) If a different or special sealant product is used, please contact DropsA S.p.A. to ensure its suitability.
ATTENTION: pump maximum supply pressure 7 bar.
2
GENERAL CHARACTERISTICS
5kg version
25kg version
HYDRAULIC CHARACTERISTICS
27 Kg
34 Kg
Piston
100/1
400 gr*min
700 bar
0.1 Kg/cm^2
Quick couplings 1/4"
Ø22 Button head coupler
5kg (Ø190) - 25kg (Ø290)
- 5 ÷ + 50 °C
90 % Humidity rel.
Sealant/Grease max NLGI3
-20 ÷ +65 °C
< 70 dB(A)