DROPSA 201000 Gebruikers- en onderhoudshandleiding - Pagina 8
Blader online of download pdf Gebruikers- en onderhoudshandleiding voor {categorie_naam} DROPSA 201000. DROPSA 201000 10 pagina's. Pneumatically operated pump
Pagina afdrukken
15. PRECAUTIONS
Verification of compliance with essential safety requirements and machine Directive dispositions has been carried
out filling in checking lists provided and contained in the technical file.
Dropsa used two kind of checking lists:
•
The list of hazards (according to the EN 1050 as it refers to EN 292).
•
Enforcement of the essential safety requests (machine Directive – annex 1, part 1).
The following is a list of dangers which have not been fully eliminated but which are considered acceptable:
♦
it is possible to encounter squirts of oil during maintenance operations (for this reason appropriate
protective clothing must be worn);
♦
contact with oil -> see the requirements for the use of suitable personal protective clothing;
♦
use of unsuitable lubricant -> the characteristics of the fluid are shown on the pump and in the manual
(in case of doubt contact the Eng. Dept of Dropsa Spa);
♦
protection against direct and indirect contact must be provided by the user;
♦
given the purpose of the pump it must always be functioning; for this reason it is necessary to pay
attention to the electrical connections which, in the case of a power failure, the customer's machine is
restarted only by means of a reset, while the lubrication pump is able to restart automatically.
♦
During the disassembly of the pneumatic motor there exists the danger from the preloaded
spring; take particular precautions against this risk.
Lubricants containing abrasive components.
Lubricants containing silicon.
Petrol, Solvents, flammable liquids
Corrosive products
Water
Food Products
16. WARRANTY
All products manufactured and marketed by Dropsa are warranted to be free of defects in material or workmanship
for a period of at least 12 months from date of delivery. Extended warranty coverage applies as follows:
Complete system installation by Dropsa: 24 Months
All other components: 12 months from date of installation; if installed 6 months or more after ship date, warranty
shall be maximum of 18 months from ship date.
If a fault develops, notify us giving a complete description of the alleged malfunction. Include the part number(s),
test record number where available (format xxxxxx-xxxxxx), date of delivery and installation and operating
conditions of subject product(s). We will subsequently review this information and, at our option, supply you with
either servicing data or shipping instruction and returned materials authorization (RMA) which will have instructions
on how to prepare the product for return. Upon prepaid receipt of subject product to an authorized Dropsa Sales &
Service location, we will then either repair or replace such product(s), at out option, and if determined to be a
warranted defect, we will perform such necessary product repairs or replace such product(s) at our expense.
Dropsa reserves the right to charge an administration fee if the product(s) returned are found to be not defective.
This limited warranty does not cover any products, damages or injuries resulting from misuse, neglect, normal
expected wear, chemically caused corrosion, improper installation or operation contrary to factory recommendation.
Nor does it cover equipment that has been modified, tampered with or altered without authorization.
Consumables and perishable products are excluded from this or any other warranty.
No other extended liabilities are states or implied and this warranty in no event covers incidental or consequential
damages, injuries or costs resulting from any such defective product(s).
The use of Dropsa product(s) implies the acceptance of our warranty conditions. Modifications to our standard
warranty must be in made in writing and approved by Dropsa.
INADMISSIBLE FLUIDS
Fluid
Danger
Premature wear of pump
Pump failure
Fire, explosion, seal damage.
Pump damage, danger to persons.
Pump oxidization
Contamination of product
8