DROPSA 3414000 Gebruikers- en onderhoudshandleiding - Pagina 3
Blader online of download pdf Gebruikers- en onderhoudshandleiding voor {categorie_naam} DROPSA 3414000. DROPSA 3414000 10 pagina's. Pneumatic-driven pump
Pagina afdrukken5. PUMP COMPONENTS
5.1 Example of a pneumatic-driven pump Series 3414...
6. UNPACKING AND INSTALLING THE PUMP
6.1 UNPACKING
Once a suitable location has been found to install the unit remove the pump from the packaging. Check the pump has not
been damaged during transportation or storage. No particular disposal procedures are necessary, however packing
should be disposed of in accordance with regulations that may be in force in your area or state.
6.2 INSTALLING THE PUMP
No particular assembly operations are provided.
Pump must be fixed to floor. On this purpose, pump bracket has been provided with 4 holes, Ø 8.5 mm (0.33 in). Then,
pump must be pneumatically connected to the machine (see par. 5.1).
Furthermore, we recommend:
To leave minimum 100 mm (3.93 in.) space around the pump in order to avoid unnatural posture or possibility
of sustaining impacts.
Not to install pump submerged into fluids or in aggressive/explosive/inflammable environments, if not
preventively provided for this purpose by the supplier.
To use gloves and safety glasses, as required in the lubrication oil safety chart.
Not to use aggressive lubricants with NBR seals. If any doubt, please contact Eng. Dept. of Dropsa S.p.A. We will
provide you with a detailed chart of recommended oils.
Not to ignore dangers to health and observe all hygienic standards.
3