AnkerMake M5 Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AnkerMake M5. AnkerMake M5 18 pagina's.

Pagina afdrukken

Troubleshooting

Common
Illustration
Failures or
Issues
• Filament issue (depleted,
No Filament
entangled, broken, unclean).
Extruded
• Nozzle clogged.
• Gcode file issue.
• PEI plate is stained with dust
and grease.
• Abnormal auto-leveling.
Initial Layer
• Incorrect Z offset value.
Not Sticky
• Printing overspeed.
• Low temperature of the
nozzle and hot bed.
• The filament is wet, resulting
in poor print quality.
• The E-axis retraction
distance is short or the
retraction speed is slow.
• The printing temperature is
Flowing or
too high, causing the filament
Falling
to flow and fall due to gravity
during idle driving.
• The floating distance is too
long, causing the filament to
fall due to gravity.
• The nozzle is worn.
• The acceleration and jerk
speed parameters are set
beyond the optimal printing
range.
• Caused by mechanical
Layers
movement during printing
Dislocation
process.
• The small-angle suspended
surface structure of the print
model is not conducive to
high-speed printing, resulting
in layers dislocation.
• Unclean filament and dust
cause nozzle jams.
Nozzle Jams
• Unsuccessful printing causes
nozzle jams.
27
Causes
Solutions
https://support.ankermake.
com/s/article/How-to-Fix-the-
Extruder-Filament-Feeding-
Issue
https://support.ankermake.
com/s/article/How-to-Fix-the-
Initial-Layer-Is-Not-Sticky-Issue
https://support.ankermake.
com/s/article/How-to-Fix-
Filament-Drawing-Sagging-
on-the-Print-Model
https://support.ankermake.
com/s/article/How-to-Fix-the-
Layer-Shifting-Issue-of-the-
Print-Model
https://support.ankermake.
com/s/article/How-to-Fix-the-
Burrs-and-Residues-in-Nozzles
Common
Illustration
Causes
Failures or
Issues
• Filament entangled.
• The initial layer of the print
model is not sticky.
Spaghetti
• Partial warping of the print
Effect
model causes the collision of
the nozzle and movement of
the print model.
Solutions
https://support.ankermake.
com/s/article/How-to-Fix-the-
Spaghettification-Issue
28