anko BCW-50A Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} anko BCW-50A. anko BCW-50A 12 pagina's. 18 bottle wine cooler
Pagina afdrukken
9
Troubleshooting
Symptoms
The wine cooler does not
work.
Control panel is locked
Wine cooler is not reaching
the desired temperature
The light does not work.
Vibrations
The door will not close
properly.
Possible cause
There is a power failure.
A house fuse has blown or circuit
breaker has tripped
Control Panel has Locked
The cooler is placed too close to a heat
source
Not sufficient ventilation
The door is opened too frequently or for
a long period of time
The door is not closed completely.
The door gasket does not seal properly.
The Wine Cooler does not have the
correct clearances.
The ambient temperature is too high.
More than 25˚C
Not plugged in.
The circuit breaker tripped or a blown
fuse.
The light button is "OFF".
Unit is not level
The Wine Cooler is not level.
The door was not properly installed.
The gasket is dirty.
The shelves are out of position.
Page 10 of 12
Solutions
Ensure the cooler is plugged in and the
power socket is turned on.
Replace the broken fuse or reset the
circuit breaker in your meter box.
Press the
button for 2 seconds to
unlock the control panel.
Wait for beep sound
Keep the cooler away from sunshine or
other heat sources.
Place the wine cooler in good ventilation
and keep any items away from the fans.
Close the door tightly and do not open
the door too frequently or for a long
period of time.
Ensure the Door is Closed properly
Ensure the gasket is fitted properly and
not damaged.
Ensure there is adequate clearance
around the unit. Refer to the installation
instructions.
Place Wine Cooler in a cooler position
Ensure the unit is plugged in and
switched on
Check the fuse and circuit breaker
Press the Light Button
Ensure that the Wine Cooler is level.
Ensure the unit is level
Ensure the door is working properly
Clean the door gasket
Ensure the shelves are installed correctly