anko BFT1803R Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} anko BFT1803R. anko BFT1803R 12 pagina's.

5.3 Fan + Swing (Oscillating)

With the Fan already in use, press the "Swing" button on the control panel, or the

•

button on the remote control to start the tower swinging (Oscillating) side to

side.

•

To turn Off the Swing, or to stop the fan swinging in a set position, press the "Swing"

button on the control panel, or the

With the Fan already in use, press the "MODE" button on the control panel, or the

•

On the Control Panel, press the "Mode" button. Each press will cycle between,

•

"Normal", "Natural" and "Sleep" fan wind patterns.

On the remote control, Press the

•

for Natural Mode and press the

Nor: The "Normal" Default Mode is set when the unit is first turned on. The wind remains

a constant flow.

Note: The Red indicator light will change to Blue colour when the Fan is in use and set

in Normal mode.

Nat: The "Natural" variable speed wind mode automatically selects one of three variable

speed wind speed patterns. Each Pattern produces a different wind pattern depending

on the Speed Setting Selected.

These Wind Patterns simulate the variable speed wind that you would experience

outdoors.

Sleep: The "Sleep" mode creates wind patterns that are the same as the Natural Mode

wind patterns, however, when the fan is set to either Medium or High Speed, the pattern

will drop a speed level after approximately 30 minutes.

For Example: If High Speed Fan and the Sleep Mode is selected, this will be the same

wind pattern as High-Speed setting in Natural Mode. However, after approximately 30

minutes, the wind pattern will automatically drop down to the same wind pattern as if

Natural Mode was selected at Medium fan speed.

After approximately a further 30 minutes, the wind pattern will automatically drop down

to the same wind pattern as if Natural Mode was selected at low fan speed.

The fan will continue to run in the Low Speed Natural Mode until manually turned off.

Note: To have the fan automatically turn off at your desired time in this mode, use the

"Timer" function to select the auto off timer.

button on the remote control.

button for Normal Mode, Press the

button for Sleep Mode.

Page 10 of 12

button