anko SL163E Handmatig - Pagina 13

Blader online of download pdf Handmatig voor {categorie_naam} anko SL163E. anko SL163E 20 pagina's.

During emptying of the dust canister, the outer lower post should be

•

removed so as to clean away any hair and debris that may be wrapped

around the inner post.

To remove, whilst the dust canister trap door is open, hold the dust

•

canister body firmly, grasp the outer lower post and rotate

anticlockwise to unlock then pull straight out as shown.

Clean the inner tube using your fingers or a brush.

•

Alternatively, first remove the dust canister body by holding the top

•

section of the dust canister and rotate the bottom clear section of the

dust canister anticlockwise and pull apart.

Then remove the outer lower post and clean as described above.

•

Brush the inside of the dust canister with a small brush or wash Refer

•

to section "Cleaning".

To refit the outer lower post, push over the inner post all the way and

•

rotate clockwise until it locks in place.

Page 13 of 20