anko WHL-106 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} anko WHL-106. anko WHL-106 10 pagina's. Window vacuum cleaner

BEFORE FIRST USE

Fig.1

PLEASE INSERT SUCTION STRAINER BEFORE USING (Fig.1)

Before use

⚫

Remove all packaging materials.

Clean the device, if necessary, with a wet cloth and some mild detergent (also refer to "CLEANING AND

⚫

STORAGE").

⚫

Check the device for any damage before each use. Do not use the device if the power cord or battery

charger is damaged or when not functioning properly.

Charging the battery

Attach the battery charger (13) to the device through the charger socket (12) before connecting the battery

charger to the power supply. Make sure the power supply indicated on the battery charger corresponds with

the local voltage. A blue light at the charger indication light (11) will turn on and flash to indicate the device is

charging and all four LED lights will turn ON when the battery is fully charged. It takes approximately 2 hours

to fully charge the battery.

Note: We recommend that you unplug your charger when charging is completed.

Note: Always make sure the device is fully charged before using it.

Filling the water tank

Switch the device OFF and disconnect it from the charger. Pull out the water tank and remove the cap. Fill the

water tank (6) with clean water (or distilled water) by slightly tilting the device forward. Once the water tank is

nearly full, replace the water tank cap.

Fig.2

Fig.3