anko WBL-005 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} anko WBL-005. anko WBL-005 10 pagina's.

IMPORTANT SAFEGUARDS

When using any electrical product, always follow these basic safety precautions:

READ ALL INSTRUCTIONS BEFORE USE

WARNING:

1. To protect against electrical shock, do not submerge the appliance or allow the power cord to come in

contact with water or any other liquid.

2. This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instructions concerning use of the appliance by a person responsible for their safety.

3. Children should be supervised to ensure that they do not play with the appliance.

4. Never let the appliance operate unattended.

5. Remove the power cord from the electrical outlet when not in use, before assembling or disassembling

parts and before cleaning. To unplug, grasp the plug and pull from the mains power outlet socket. Never

pull from the power cord.

6. DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect

from electrical outlet; instead grasp on the plug and pull to disconnect.

7. DO NOT operate the appliance with a damaged cord or plug, or after the appliance malfunctions, has

been dropped or damaged in any manner.

8. If the power cord is damaged, it must be replaced by a qualified electrical person in order to avoid a

hazard or the appliance must be disposed.

9. DO NOT let the power cord hang over the edge of table or counter or touch hot surfaces such as the

stove.

10. Always use the appliance on a dry, level surface. Sink, drain boards or uneven surfaces must be

avoided.

11. Keep hands, hair, clothing, as well as utensils out of jug while processing to reduce the risk of severe

injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not

running.

CAUTION: Blade assembly is sharp, handle with care. When handling the blade assembly, always

hold by the base of the blade assembly.

12. Avoid contact with moving parts.