3M Clean-Trace Luminometer LX25 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3M Clean-Trace Luminometer LX25. 3M Clean-Trace Luminometer LX25 16 pagina's.
Pagina afdrukken
Important Safety Information
3M™ Clean‑Trace Luminometer LX25
Please read, understand, and follow all safety information
contained in these instructions prior to the use of this
3M™ Clean‑Trace™ Luminometer. Retain these instructions
for future reference.
Product Description and Intended Use:
The 3M™ Clean-Trace™ Luminometer LX25 is a battery operated
Luminometer utilized primarily for objective and sensitive
determination of the end result of 3M™ Clean-Trace™ Adenosine
Tri-Phosphate (ATP) tests . The Clean-Trace Luminometer LX25
power supply is provided to charge the battery .
3M has not designed nor documented the Clean-Trace
Luminometer LX25 or Clean-Trace Luminometer LX25 power
supply for use with other manufacturers' products, use with
other manufacturers' designs, or use in any other application
that has not been evaluated or documented by 3M and may lead
to an unsafe condition . The Clean-Trace Luminometer LX25
is not intended to be used in potentially flammable or
explosive environments . Surfaces or solutions should not be
considered sterile based on results from the 3M Clean-Trace
Luminometer LX25 . The 3M Clean-Trace Luminometer LX25 is
not intended to be used in the diagnosis of conditions in humans
or animals . The user is responsible to know and follow applicable
workplace regulations . Clean-Trace ATP tests, equipment, and
software must be utilized by technicians that have been properly
trained on the 3M™ Clean-Trace™ ATP Monitoring System
according to all applicable instructions for use .
If this product is used in a manner not specified, the results
provided by the product may be impaired .
Explanation of Signal Word Consequences
WARNING: Indicates a hazardous situation which, if
not avoided, could result in serious injury or death
CAUTION: Indicates a hazardous situation which, if
not avoided, could result in minor or moderate injury
and/or property damage .
NOTICE: Indicates a situation which, if not avoided, could
result in property damage .
Explanation of Safety Related Symbols
Warning: Hazardous Voltage
Attention: Read Accompanying Documentation
CAUTION: Recycle 3M™ Clean-Trace
Luminometer LX25 to avoid environmental
contamination . This product contains recyclable
parts . For information on recycling, in the US
please contact 3M Health Care Service Center
at 1-800-292-6298 for additional information .
Outside of the US contact your local 3M office .
WEEE mark - This product contains electrical
and electronic components and must not be
disposed of using standard refuse collection .
Please consult local directives for disposal of
Li
electrical and electronic equipment .
Class II: Class two insulation referred to as
double insulation .
Applies to 3M Clean-Trace
Luminometer LX25 Power Supply: Alternating
current AC source .
Applies to 3M Clean-Trace
Luminometer LX25 Power Supply: Direct
current DC source .
UL NRTL mark (US and Canada electrical safety)
CE mark (conforms to applicable requirements
for European Economic Area) .
RCM mark (Australia electrical safety and EMC)
BC mark (California regulation for battery
charging systems)
The 3M Clean-Trace Luminometer LX25 model
REF
number, which is LX25 .
The 3M Clean-Trace
Luminometer LX25 serial number
2
Efficiency: Complies to section
301 of Energy Independence
and Security Act (EISA)
complies with Energy Star tier .
2 (North America), ECP
tier 2 (China), MEPS tier
2 (Australia), Code of
Conduct (Europe)