DRUID Debut HUB Snel aan de slag - Pagina 2

Blader online of download pdf Snel aan de slag voor {categorie_naam} DRUID Debut HUB. DRUID Debut HUB 5 pagina's.

Getting Started

Step 1: Assign Devices to HUB

Here you will see your HUB device number (Device ID or UUID). Click to the number and then

click

. From the list, you can choose the devices to assign to HUB.

Note:

To protect privacy, HUB can only communicate with devices assigned to it.

You can assign one device to multiple HUBs.

HUB is also displayed in the " Terminal" list, because it also generates its own data like a

tracking device. This part of data is displayed in " Terminal " page.

Step 2: Install Antennas for HUB

Install the three antennas for HUB as shown below.

Step 3: Turn On HUB and Deliver Settings

We recommend that you always turn on a device with your mobile phone connected to network,

especially for the first time of device initialization.

Note : If you plan to initialize your device in an environment without mobile network, please

make sure you have cached all necessary information in your mobile phone beforehand.

For details, please read " Help > Data Platform > Ecotopia App > Cache Management " on

the datacenter (https://ecotopiago.com/help/en/#/instruction/App/cache_setting).

1）Authorize Bluetooth to Ecotopia App, and log in with your account.

2）On Ecotopia App, tap

turn them on, and deliver the settings to the device.

Note : "Setting delivery" is an important step to initialize your device. By doing this, the

device can obtain the fine settings that are suitable for each sub-model. When your App is

on top right to scan QR code on HUB, and follow the instructions to