Drvie Poly-fly Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Drvie Poly-fly. Drvie Poly-fly 2 pagina's. Wheelchair/transport chair
Pagina afdrukkenwheelchair/transport chair
Lock
Mechanism For
Back Support
Wheel Lock
For 24" Wheel
Wheel Lock
for 24"
Wheel
Footrest Peg
To transition to self propelled chair, lift
rear of Poly-fly chair, depress quick release
push button on 24" wheel and slide into
top axle as shown. Rear 8" casters are to
remain on chair.
HOW TO OPERATE YOUR POLY-FLY
WHEELCHAIR/TRANSPORT CHAIR
Your Poly-fly Wheelchair/Transport Chair Dealer can
assist you making adjustments and provide you with
Footrest
Locking
operational information.
Device
1. To Open the chair, tilt to one sides and push down
on seat rails.
2. Lift back support to upright position. The lock to
secure the back will engage automatically. To fold
down and store, pull up on locks simultaneously,
and carefully fold down the back support.
3. To attach footrests, align the holes on the footrest
arm with the pegs on the frame of the Transport
chair. (See Diagram)
4. To Adjust the length of the footrests, loosen the
bolt (or knob) on the telescoping tube shaft.
Tighten securely after adjustment. The lowest part
of the footrest should not be less than 2 1/2 inches
from the ground to permit proper clearance.
5. To remove the Swing-away footrest, release the
lock. Swing outward and rearward. Simply lift up
and off to remove the footrest.
7. To transition to self propelled chair, lift rear of
Poly-fly chair, depress quick release push button
on 24" wheel and slide into top axle as shown. Rear
8" casters are to remain on chair.
operating tips
safety tips
1. Before entering or leaving the chair, engage
the dual wheel locks against the tires on both
rear wheels. Make sure the front casters are in the
forward position before transferring into or out of
the chair.
2. Do not move forward on the seat while leaning
forward out of the chair. If it is absolutely
necessary to do so, make sure the front casters are
in the forward position. If you are picking an
object up from the floor, go past the object, and
then go backwards. The casters will then swing to
the forward position.
3. Leaning out of the transport chair without proper
assistance could cause tipping.
4. Do not step on the footplates when transferring, as
this could cause tipping.
NOTE:
You and your attendant should consult a
qualified professional for correct techniques on ramp
negotiations.
It is important for the attendant to be familiar with
proper assisting procedures in any situation that
requires the use of the Poly-fly Wheelchair/Transport
Chair. Safety is the key consideration. Consult your
physician, nurse of physical therapist to determine
methods most suitable for your individual needs and
abilities.
NOTE:
The Poly-fly wheelchair/transport chair does
not conform to Federal Standards for automobile
seating and should not be used as a seat in a motor
vehicle.