DRY AGER DX 500 Gebruiksaanwijzing - Pagina 8
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DRY AGER DX 500. DRY AGER DX 500 17 pagina's.
Ook voor DRY AGER DX 500: Gebruikershandleiding (14 pagina's), Instructies voor vervanging (2 pagina's)
Pagina afdrukken
The activated carbon filter and UVC lamp should be
Before reaching the lifetime a maintenance message appears in the message display, see page 9.
Mehr Infos dazu unter: [email protected] | Tel. 075 81/4 89 59-0
Operating and Control Settings
View / change the temperature setting
set
temp.
(SET_TEMP)
View / change the humidity setting (SET_RH);
set
Select or confirm a parameter
%RH
during programming
Increases the displayed value
On / Off Button for the UVC disinfection
Press the button for a minimum of 5 sec
Decreases the display value
Press and hold button for 3 seconds:
Start manual defrost.
On / Off Button interior lighting
Power On / Off switch
Key combination:
+
Lock and seal keyboard
8
Ihr DRY AGER DX 500
We recommend the following settings for dry aging beef
Temperature: 1,5°C
Humidity: 82 %
replaced annually for optimum performance.
is ready to use.
®
Display and Symbols
LED 2
Temperature-Display
Humidity-Display
LED 4
LED / SYMBOL
MODE
LED 4
ON
ON
ON
ON
FLASHING
LED 3
ON
LED 3
FLASHING
ON
FLASHING
ON
ON
ON
LED 2
ON
FLASHING
LED 3
FUNCTION
Standby
°C-Unit
°F-Unit
Cooling
Delay cool
defrost active
defrost
Heating active
default level for the tem-
perature setting (Temp.)
Acoustic alarm
Fans running
RH% -Humidity
UVC-Desinfection active
default level for the
humidity setting