DryAIR 2250 Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DryAIR 2250. DryAIR 2250 19 pagina's.

Setup/Operation

Danger!

It is very important that you read and understand this section before operating the hose reel! Failure to follow the procedures and

cautions in this manual could lead to injury or possible death!

The Hose Reel has a manual method of controlling the spool rotation "UNLOAD/LOAD" and a general ON/OFF power switch.

Caution!

When NOT operating the reel, put the reel speed toggle switch (1-1) in the "Off" position to prevent accidental activation and

possible injury. When the hose reel is to be left unsupervised, the power cord should be unplugged from the power supply.

Reel Power

Power is present when the power switch (1-1) is in the "ON" position. By connecting the foot

switch you can load or unload hose by depressing the foot switch (1-2) which is momentary

(will only operate when depressed).

Reel Direction Modes

Mode 1 - UNLOAD

Mode 2 - LOAD

Caution!

Take care not to allow your hands, feet or clothing to become trapped by any of the

reel's moving mechanisms.

Mode 1 - "UNLOAD"

•

The UNLOAD mode is acheived with the mode toggle switch (1-2) in the UNLOAD

position.

•

The foot switch (2-1) is momentary and will only operate when it is depressed.

Mode 2 - "LOAD"

•

The LOAD mode is acheived with the mode toggle switch (1-2) in the LOAD position.

•

The foot switch (2-1) is momentary and will only operate when it is depressed.

•

The hose must be directed manually into position on the hose reel.

Note: To eliminate initial clutch slippage when loading hose, one loop of hose should be left slack

prior to initiating hose loading.

Setup/Operation

1-1

1 - power & mode toggle switches

2 - Foot switch

1-2

2-1

4-1